Industry Information

Update May 23, 2022

Discussion on the problem of CNC turning machining process (3)

4 Determination of the knife compensation value when “knife” For thin-walled workpieces, especially thin-walled workpieces with difficult-to-cut materials, the phenomenon of “knife-making” is severe...

Update May 22, 2022

Discussion on the problem of CNC turning machining process (2)

Figure 1 Selection of the end slot cutter location Figure 2 End position of the tool during layered cutting Figure 3 isometric cutting method As shown in Figure 1, the end slot cutter is used to...

Update May 21, 2022

Discussion on the Problems of CNC Turning Machining Process

introduction The ideal machining program should not only ensure the production of qualified workpieces that conform to the drawings, but also enable the function of the CNC machine tools to be...

Update May 20, 2022

Driven tool technology has changed the nature of CNC lathe machining

Driven tools have changed the nature of machining on CNC lathes. With multi-axis control, these lathes can produce more parts in a single clamping cycle. The use of rotary tools, updated Y-axis and...

Update May 19, 2022

Process flow of CNC EDM machining in mold enterprises

CNC EDM is an important special processing technology. It is used in mold manufacturing, aerospace, electronics, nuclear energy, instrumentation, light industry and other departments to solve the...

Update May 18, 2022

CNC electric machining machine troubleshooting (3)

Sixth, ED-NC-32 EDM machine tool Fault phenomenon; C-axis often runs at high speed, no alarm signal; there is no alarm signal when starting from C-axis high speed. According to the analysis of the...

Update May 17, 2022

CNC electric machining machine troubleshooting (2)

Third, DK7725E CNC wire cutting machine Symptom: The pulse power supply output is faulty. The machine tool generates a corresponding pulse width and interval by the multi-vibrator, and is inverted...

Update May 16, 2022

CNC electric machining machine troubleshooting

First, Sanguang brand CNC wire cutting machine Fault phenomenon: Stepper motor is out of step. The working principle of the stepper motor is shown in Figure 1. S1 is a feed switch that uses a...

Update May 15, 2022

High-productivity machining of turbochargers with Iskar tools

At present, reducing engine size is the highlight of the automotive industry, and local automakers in Germany and automakers from South Korea and Japan follow this trend. By using turbocharging...

Update May 14, 2022

CNC gantry machining center milling head clamping knife reset modification

Reconstruction background With the development of modern industrial technology, automated processing has become the mainstream of contemporary industry. Good structural performance has become an...