Industry Information

Update June 07, 2022

Milling machining parts are mechanically machined work-pieces that are produced by milling. Analogously, one speaks of welded parts in welding, laser parts in laser cutting or turned parts in...

Update June 06, 2022

Definition and Classification of Casting

Casting is one of the basic processes of modern machinery manufacturing industry. Casting is a production process in which metal is smelted into a liquid that meets certain requirements, poured into...

Update May 31, 2022

January to July Recovery of Kunshan Power Tools Exports

According to statistics from the Kunshan Inspection and Quarantine Bureau, from January to July 2013, Kunshan exported 4439 electric tools, a slight increase of 3.3% year-on-year, while the export...

Update May 30, 2022

Hardware power tools exports are not optimistic

According to statistics, in the first half of this year, Yongkang exported a total of 5289 batches of electric tools and 8.654 million units, and the export value reached US$162 million, with an...

Update May 29, 2022

Economical CNC lathe machining special-shaped spiral groove thread

The physical map shown in Figure 1 is an outsourced product processed by a factory in the internship teaching of our hospital. The name is the conveying screw shaft, which is a component of the...

Update May 28, 2022

Application of Mastercam in CNC Milling Machining Programming

This article summarizes some experience from the basic points of CNC milling programming, the introduction of Mastercam basic milling programming functions, the basic flow of NC programming, and the...

Update May 27, 2022

CAPP for double tool holder CNC lathe machining

The double-turret CNC lathe adopts multi-blade simultaneous cutting, which can shorten the working hours and improve the production efficiency, and is applied in mass production. The geometric data...

Update May 26, 2022

Application of Tool Compensation in CNC Lathe Machining Process (3)

2.3 Arc radius automatic compensation track Whether the tool radius is compensated or not, is determined by G40, G41, G42 in the G command: G40—The tool radius compensation is canceled, that is, the...

Update May 25, 2022

Application of Tool Compensation in CNC Lathe Machining Process (2)

The control point of the lathe is the center of the tool holder, so tool position compensation is always required. The tool position compensation is used to realize the conversion between the center...

Update May 24, 2022

Application of tool compensation in CNC lathe machining process (Figure)

Introduction: Abstract: The tool compensation in the machining process of CNC lathe is introduced comprehensively, and the calculation method of tool compensation when the CNC lathe does not have the...